High Alumina Wear Resistant Ceramic Tile

Wear resistant ceramic tiles are made of 92% or higher purity alumina added with other elements. Raw materials are milled to 0.1 micron in particles and evenly distributed. The powder is molded into different shapes through dry or isostatic pressing and sintered in temperature up to1700C.

Specification:
Content: 92%, 95% or higher alumina.
Density: >3.6g/cm³
Hardness: >85HRA
Bending strength: >290MPa
Compressing strength: >2250 MPa
Fracture toughness(KIC): >4.5MPa.m1/2
Porosity: <0.1
Water absorption: <0.02%
High Alumina Wear Resistant Ceramic Tile